| 806-797-4251


  • Item Code: SC480
  • Brand: Fieldpiece
  • Unit Size: 1


Your SC480 is the essential Clamp Meter with wireless functionality for the HVACR professional. Send your electrical measurements directly to the Job Link system mobile app. Leave the meter behind a closed blower door and view the current measurement on your mobile device. Help determine system efficiency by directly measuring power consumption (W) of the system. Use this value to inform your customer of energy saving measures you can take to help them save money on their energy bills. The SC480 is great for troubleshooting mini-split systems. Reach those cramped mini-split connectors with the included RCT2 probe tips for voltage and resistance measurements. Plus, measure frequency (Hz) directly with clamp jaw. Hang your SC480 Clamp Meter to any metallic surface with the heavy-duty magnet. See both voltage and amperage readings at the same time on the big dual display. Verify the order of 3-ph voltage lines with just two leads. Capture L1-L2 and L1-L3 to check that motor lines are correctly installed with phase rotation test. Take more accurate VAC and AAC readings on variable frequency drives with True RMS sensing technology. Measure the starting amp draw of a compressor with Inrush current mode. Illuminate the way with a powerful LED built into the clamp jaw. Easily see your measurements with the bright blue backlight on the display. Take measurements more safely with one hand using the single test lead holder. Test leads come with removable gold plated tips to reliably connect Fieldpiece accessory heads.


Back To Top
    • Wireless direct to Job Link system for electrical documentation
    • Low pass filter for VFD systems
    • Molex test leads for small circuitry
    • 3 ph test with two leads
    • Test HVACR electrical equipment using phase rotation, true RMS and In-rush features
    • Plus connect directly with the Job Link system app to document electrical measurements
    • True RMS readings through the clamp or leads
    • In-rush current mode to capture starting amps
    • Low pass filter (LPF) to remove noise and get true voltage
    • Test questionable motor start and run capacitors
    • Determine when a capacitor needs to be replaced
    • Swap out your regular lead tips with the super thin Molex tips to get readings on hard-to-reach circuitry
    • Hanging strap flips out to keep the meter locked in place

Tech Specs

Back To Top
AC Current Accuracy +/-(2 % + 10)
AC Response 100 ms
Brand Fieldpiece
Counts 10000
Dimensions 79 mm W x 48 mm D x 247 mm H
Display Type Dual Backlit
Electrical Ratings 1000 mV to 750 VAC, 1000 mV to 1000 VDC, 100 to 600 A AC, 1000 uA
Frequency Rating 10 to 400 Hz
Jaw Capacity 1.2 in
Operating Temperature 32 to 122 deg F
Power Accuracy +/-(5 % + 5)
Power Source 9 V Alkaline Battery
Resistance 50 MOhm
Safety Rating CAT IV 600 V/CAT III 1000 V
Voltage Accuracy +/-(1.5 % + 10)

Documents & Guides

Back To Top
Instruction/Installation Manual
Specification Sheet

Related Items